Insect Display Cases
|
|
|
|
|
 |
|
These specimen cases are a cost–effective option for displaying insect collections. The displays have a telescoping lid with glass top that fit over a lower tray and polyethylene pinning base. The chipboard frames are covered with a black embossed paper and have a depth of 2″ (51mm).
Made in U.S.A. 
|
|
|
|
 |
|
Riker Mounts
The riker mount is an effective way to exhibit a variety of specimens without the use of pins or glue. The acid–free fiber fill gently holds specimens in place against the glass top.
These chipboard display cases are covered with black embossed paper and are wall mountable. The depth of each riker mount listed below is 3/4″ (19mm).
Made in U.S.A.
|
|
|
|
 |
|
Insect Box
The insect box is designed as a storage box for specimens rather than a display. Like the riker mounts and exhibit cases above the chipboard exterior is covered with a black embossed paper and the interior is lined in bright white. The pinning base is polyethylene foam and the cover is attached with nickel plated hinges.
Outside dimensions: 10 1⁄8×12×2 1⁄2″ (257×305×64 mm)
|
|
|
|
|
|
Student Insect Box
This fiberboard storage box is the same insect box featured in the Student Insect Collecting & Mounting Kit. The three pieces are shipped flat and ready to assemble simply by folding, inserting the tabs, and pressing the polyethylene foam pinning base into place. Useful for shipping collections, as a field box, or an extra storage container for duplicate specimens.
Outside dimensions: 9×13×2 1/2″ (229×330×64 mm)
Made in U.S.A.
|
|
|
|
|
|
Unit Tray Shipper
This small box is the ideal container for shipping and handling pinned specimens. The bottom is a standard Cornell unit tray with polyethylene foam pinning base. The lid is covered with brown kraft paper to distinguish it from the all–white unit tray. A polyethylene foam insert is placed in between the lid and top of the insect pins to keep specimens stabilized during shipment.
Outside dimensions: 4 1/2×3 3/4×1 3/4″ (114×95×44 mm)
Made in U.S.A.
SALE ITEM: 15% OFF! $2.54 WHILE SUPPLIES LAST
|
|
|
|
|
|
Vaportape® II Insecticidal Strip
Originally for use as a toxicant in insect traps entomologists use these fumigant strips to protect insect collections. The 1×4″ strips contain 10% 2,2 - Dichlorovinyl dimethyl phosphate. Each strip is sealed in a protective mylar envelope.
Puncture the envelope with a pin or cut the corner of the envelope and place inside insect boxes or display cases.
Made in U.S.A.
|
|
|
|
